AVM Fritz!Box Fon WLAN 7050 Specifications download pdf (Page 61)

DHCP Server Settings in the User Interface

FRITZ!Box Fon WLAN 7050 – 7 Guidebook 61

The computers can receive their IP addresses from the DHCP

server only if the setting “Obtain an IP address automatical-

ly” is enabled in the their IP settings. For more information,

see the section “IP Settings” from page 75.)

Only one DHCP server may be active within any network.

DHCP Server Settings in the User Interface

Proceed as follows to open the DHCP server settings:

1. Make sure that the setting “Show expert settings” is en-

abled on the “Expert Mode” page (“System / Expert

Mode”).

2. Open the menu “System / Network Settings” in the

FRITZ!Box Fon WLAN user interface.

3. Click the “IP Addresses” button.

The “IP Settings” page is opened. Here you can make

the settings for the DHCP server.

IP Networks

The settings “All computers are located in the same IP net-

work” specifies whether all of the computers connected with

FRITZ!Box Fon WLAN are located in the same IP network or in

different IP networks.

“All computers are located in the same IP network” Is

Enabled

z The IP network of FRITZ!Box Fon WLAN is specified by

the settings “IP address” and “Subnet mask”. The ad-

dress registered in the “IP address” field is the IP ad-

dress of FRITZ!Box Fon WLAN. FRITZ!Box Fon WLAN can

be reached at this address in the IP network. The IP ad-

dress preset upon delivery is 192.168.178.1.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 120 121

No comments

AVM Fritz!Box Fon WLAN 7050 Specifications Page 61