AVM OVATION SA8.2 Operations Instructions Page 1

Power Amplifier OVATION SA8.2 Operating Instructions AVM GmbH, Daimlerstrasse 8, D-76316 Malsch, Germany

10 3. Menu system 3.1 Operating the menu system The settings for customizing your OVATION SA8.2 are done via the menu system. The menu syst

11 4. Care of the casing The surface and printed text on the casing is largely scratch resistant. The casing may be cleaned with a mild soap solutio

12 After switching off the pre-amplifier the amp does not automatically switch to STAND BY (after approx. 5-10 min.) although the "auto" mo

13 6. Conditions of warranty (Europe only) If despite expectations a defect occurs that cannot be repaired by yourself or your dealer,

14 7. Technical Information Sensitivity Cinch: 1.2 V / 10 kOhms (400 W / 4 Ohms) Sensitivity XLR: 1.2 V / 20 kOhms (400 W / 4 Ohms) G

2 Dear Customer, Thank you for the trust you have shown in us with the purchase of this power amplifier. You have acquired a versatile hi-fi compone

3 Packing The bottom of the flight case in which the unit is packed is NOT symmetrical. If you want to pack the unit into the case please

4 Removing the cover plate The cover plate is screwed from the bottom side of the unit. To open it, put the unit to the edge of a desk (right up, NO

5 1. Technical Specialties of the OVATION SA8.2 in short The OVATION SA8.2 delivers nearly any desired power level even into critical loudspeakers w

6 2. Operation of the OVATION SA8.2 In the text you will find a number behind the names of the individual controls. These refer to

7 2.1 Placement of the unit / cooling The OVATION SA8.2 can warm up considerably - depending on the required output power. It is therefore ve

8 2.3 First steps, switching on and off Right after arrival in your home the OVATION SA8.2 might be cold (depending on the weather outside during

9 If you are using banana plugs secure the outer parts of the sockets (by clockwise turning) before inserting the pin. This will prev